Page 1 of 1

I'm slow but...

Posted: 12 Aug 2015, 21:33
by machete
the absurdity just occurred to me.

"*love*" is censored on this forum but the word is proudly displayed in the site's banner as part of the clan's name.

So do we approve of that word or not?

Personally I think it's *loving* excellent.

Someone come play DX with me. I'm bored.

Re: I'm slow but...

Posted: 12 Aug 2015, 22:24
by synthetic
I saw ya on forums and wanted to come but my guys got me into a raid in AO. Should be able to come on dx in some 10 mins.

Re: I'm slow but...

Posted: 14 Aug 2015, 20:11
by ShadowRunner
We banned the word "nice" once. Unhelpful word in giving feedback.

Re: I'm slow but...

Posted: 15 Aug 2015, 21:03
by Tidus
ShadowRunner wrote:We banned the word "nice" once. Unhelpful word in giving feedback.
nice

Im slow but

Posted: 13 May 2017, 13:04
by fairytellyx
im just recovering data from a WD3200JB.

Disk does not spin up correctly, but i did some tricks to be able to get to data...

What i did

I got 2 working donor drives - from one i changed heads - fine, but drive still does not spin up correctly itself.

so what i did now, started the working drive - Standby - changed PCB to the other one.

and pres spin up - yeeeahha all heads test passed, SA reading successfully, but not neccessary anymore, tried to access data - see the folders of the FAT32 partition, but if i try to copy files, most of them are faulty.

so, i started cloning the drive - on Friday...

i played around with some settings and so on - it reads everything successfully, i can see data in it, but its very very slow..

from friday till now im able to copy 236Mio Sectors - from 625 Mio.

Sometimes the disk reads 100.000 without problems, after that slow, and so on, so i tried some settings with skipping 100.000 and much more.

In log i can see tons of "Drive is not ready" entries, of course, its another PCB and so on.

Any ideas for give that a boost - without turning the drive off again?